Posts in micro soldering repair
iPhone 13 Pro & iPhone 13 Pro Max White Screen Repair

When faced with the frustrating issue of a white screen on your iPhone 13 Pro, soldering a wire on the screen can offer an effective solution. The white screen problem is often caused by a loose or damaged connection between the screen and the lcm panel. By carefully soldering a wire to reconnect these components, the electrical connection is restored, allowing the screen to function properly once again. This delicate procedure requires the expertise and precision of a skilled technician to ensure that the soldering is done accurately and without causing any further damage. Once the wire is securely soldered into place, the white screen issue is resolved, allowing you to enjoy your iPhone 13 Pro's vibrant and functional display once again.

Read More
Framework Laptop 11th Generation RTC Battery Repair Service

Framework’s 11th Generation laptops are great, however they come with a major flaw relating to the RTC Battery. In this blog we will talk about what the RTC battery issue is, how it affects users, and how we at Microsoldering Repairs are able to fix it.

Read More
Shure QLXD1-H50 Headphone Input Soldering Replacement

Are you in need of a headphone port replacement on your Shure QLXD1-H50? Often times after being used for many service hours, these ports will loosen up and/or break pins from inside the connector which can result in static, loss of audio and/or sound. At Micro Soldering Repairs we have the tools and parts to repair your Shure QLXD1-J50A Bodypack Transmitter

Read More
Stratus Appareo PRX V2 USB Port Repair

The Stratus Appareo PRX is a portable, battery-operated receiver that works in conjunction with the ForeFlight Mobile app. It provides pilots with free in-flight weather and traffic and is a source of accurate GPS WAAS position.

This unit has a micro usb 3 port for connectivity and charging the internal battery. Given the long tip of the cable and short mounting points, this is common failure point for this unit.

Read More
Toyota Key Fob Button Repair

This Toyota highlander limited 2008 Key Fob needed repair to fix the unlock button. The tactile button switch was worn out by being pressed hundreds of times. Typically we would buy a replacement button from one of our vendors but this one was especially difficult to source based on its age. In this case we went ahead and swapped another button from the trunk release. After doing this we found that the button still did not work. Upon further investigation we found that a via which connects between the layers of the board was at fault. From this damaged via we were able to run a jumper to the other solder spot on the other side of the board. Take a look at the in-depth repair demonstrated on video.

Read More
Trimble Navigation 99133 Micro USB Port Repair

The Trimble Navigation 99133 is a device that we have had come into our shop several times for issues with the USB port. Most often, the Micro USB port is clearly damaged through visual inspection, with bent/broken pins and/or shielding for the port. In some cases, we have even seen the port completely broken free from the motherboard. Regardless of the damage, our skilled technicians are up to the challenge.

Read More
iPod Classic Battery Connector Repair

Do you have an iPod Classic that was accidentally damaged during a repair attempt? If so, hope is not lost as our highly skilled technicians are here to lend you a helping hand. In this particular case, an iPod Classic was in the process of service when the plastic battery connector was broken from the main board of the device. When this connector had broken from the surface of the motherboard, there were a number of solder pads pulled from the circuit along with the traces that allow for electricity to flow to the proper locations of the device.

Read More
Zebra ZD620 Printer PCB USB Port Repair

Are you having issues with a USB port on an electronic device? Is your USB port physically damaged or otherwise unresponsive? If so, contact us at www.microsolderingrepairs.com to send in your device for service. This is certainly a service that our trained technicians are more than capable of taking care of, and this is demonstrated through the repair of this Zebra ZD620 Printer PCB USB port.

Read More
Samsung Galaxy J727 Micro USB Port Repair

Are you having issues charging your Samsung Galaxy J727 when plugging in the device? Does it seem to be physically difficult to plug in the cable to your device? If the answer to these questions are yes, then send us your Samsung Galaxy today so that our skilled technicians can evaluate the damage and repair the micro USB charging port!

Read More
iPhone 11 Backlight Repair

The Apple iPhone 11 utilizes an LCD panel in its design, which means that a high voltage backlight circuit is an integral part of the design to make image on the display visible. Damage to this circuit most often occurs during a screen replacement in which proper precautions are not
taken, particularly if the battery is left plugged in when the screen is removed or connected to the logic board of the device. There is a chance that if the battery is left plugged in, a resistor on the logic board will be damaged, causing the backlight circuit to malfunction.

Read More
iPhone X,XS,XR Ear Speaker Soldering Repair

Having ear speaker sound problems on your iPhone model X/XS/XR/XS Max, have our trained technicians take your device in to perform a ear speaker replacement soldering service. Contact us today!

As part of the iPhone X series and up Face ID biometrics now locks the front facing hardware to the motherboard which limits the options of replacement parts and repairs. For any replacements on the front ear speaker flex cable this would result in a loss of the Face ID function feature.

Something as simple as the ear speaker being damaged from water or technician damage would typically render the Face ID to fail if the whole flex cable assembly was replaced.

Read More
Nintendo Switch Charging Port Repair

Is your Nintendo Switch not taking a charge or connecting to your computer the way it should? Sounds like you might be in need of our Nintendo Switch charge port repair service.

You no longer need to throw away your broken switch console unit after the port/docking connector has been damaged. Fixing this port is well worth it and much cheaper than buying a new one. Contact us today to get yours repaired.

Read More
Motorola FPC Screen Connector Repair

Installing a screen into your Motorola device and broken the locking tab or flexible printed circuit connector?

This is a common issue we see with DIY repairs when the screen cable is not seated properly and then the locking tab is flipped down. In order to fix this it’s typically required to replace the whole connector. We routinely repair this on many different motherboards.

Read More
iPhone 8 Hydra (U6300) IC Replacement

When an iPhone 8 no longer charges, it can be the fault of many things. Typically it is the fault of the charging port, but when this is replaced and issues still exist then it may be time to look at the board.

If all the “external” parts have been replaced and tested (charging port/battery) then the fault can be related to what used to be called the Tristar, which has now been updated and renamed to the Hydra IC 1612A1 (U6300)

Read More